Zoom

AJ Lever Latch Set With Keyed Deadbolt

AJGLK

  • Easy, Elegant Upgrade: This stylish door handle with deadbolt lock replaces most standard storm door handle sets; the matching keyed deadbolt adds both curb appeal and security to your home
  • Storm Door Compatibility: This handle set will work with any out-swinging door. This package includes all the hardware and components needed to fits doors from 1" to 2-1/8" thick. If your door is thicker, you may need a longer spindle and screws
  • Replacement Storm Door Handle: This storm door handle uses a standard 1-3/4" hole spacing, in most cases you can replace your old storm door handle with this one using the same holes
  • Straightforward Installation: If you're replacing a handle and lock set, simply remove 4 screws, swap out the handles and lock set, and reinstall. For new installations, only 6 standard drilled holes are needed
  • Included in the Box: The package includes a lever handle, interior latch and keyed deadbolt, screws and spindles for doors from 1" to 2-1/8" thick, a surface-mount strike plate, shims, two keys, and installation instructions
US$59.99
Clear All

Support

Product info

Product info

Modern Styling 

This storm door hardware set includes a sleek, modern lever handle, interior latch and keyed deadbolt. It is compatible with most pre-installed handles and is designed to match the styling used on many new prime entry doors. Lever handles are much easier to use than the basic push button handle that may have been pre-installed on your storm door. The interior latch features an easy opening push movement. The matching keyed deadlock provides additional security, so you can keep your main door open and enjoy the light and fresh air while still feeling safe (this is not a high security lock, but a secondary level of security).

Installation

This set includes everything needed for an easy installation and will fit doors from 1” to 2-1/8” thick. Installation should take about 30 minutes. When replacing an existing handle, the screw posts for the handle must be 1-3/4” apart. For new installations, six holes are required to be drilled through the door for the screws and spindle. The lock can be installed above or below the handle, depending on your preference. The spindle for the deadlock may be cut for your particular installation. A tape measure, drill and screwdriver will be required. A center punch to mark the holes is helpful. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle. 

Replacement Parts

Keyed Deadbolt: GLK

Deadbolt Spindle: 1200

Key Blank: KBSK1215

Handle Spindle: SSD-LH04

Inside Latch Shim: SS45

 

Packaging info

Packaging info

   

AJGLK

There is no review yet for this item.
To top