GL Lever Set with Keyed Deadbolt

HK01-I

  • EASY, ELEGANT UPGRADE: This stylish lever handle and inside latch replace any standard storm door handle set. Along with the matching keyed deadbolt, add both curb appeal and security to your home.
  • UNIVERSAL COMPATIBILITY: The handle and deadbolt are compatible with most (but not all) pre-installed handles. VERIFY DIMENSIONS BEFORE PURCHASING.
  • DOOR COMPATIBILITY: This handle set should work with any out-swinging storm or screen door. The package includes hardware (spindles and screws) for doors from 1" to 2-1/8" thick. If your door is thicker, you may need to buy longer hardware.
  • EASY INSTALLATION: Installation is easy whether you're replacing a handle (use the existing holes!) or adding a new one.
  • WHAT'S INCLUDED: The package includes a lever handle, interior latch and keyed deadbolt, as well as all components and hardware.

US$37.29

Product info

Product info

Easy, elegant upgrade_x000D_ _x000D_

Elegant

_x000D_ This deluxe storm door hardware set includes an elegant lever handle, interior latch, and keyed deadbolt. It is compatible with most pre-installed handles, and compliments a wide range of décor styles. The long-lasting finish will provide an added touch of class to any storm door._x000D_ _x000D_

Easy to use, easy to install

_x000D_ The elegant and easy to operate handle replaces the basic push button handle that may already be on your screen door. The interior latch features an easy opening push movement._x000D_ _x000D_

Added security

_x000D_ The matching keyed deadlock lock provides additional security, so you can keep your main door open and enjoy the light and fresh air while still feeling safe (this is not a high security lock, but a secondary level of security). _x000D_ _x000D_

Installation

_x000D_ This set includes everything needed for an easy installation and will fit doors from 1” to 2-1/8” thick. Installation should take about 30 minutes. When replacing an existing handle, the screw posts for the handle must be 1-3/4” apart. For new installations, three additional holes are required to be drilled through the door for the screws and spindle. The lock can be installed above or below the handle, depending on your preference. The spindle for the deadlock may be cut for your particular installation. A tape measure, drill and screw driver will be required. A center punch to mark the holes is helpful. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle. If they do, raise or lower the storm door hardware._x000D_ _x000D_ Ideal Security has been supplying quality hardware to door manufacturers for 60 years. Please explore our other door and window hardware products for your home.

Support

Support

 

Instructions and technical documents

Videos

Videos

 

 

Packaging info

Packaging info

   

HK01-I-022

   

HK01-I-061

   

HK01-I-073

   

HK01-I-099

   

HK01-I-AB

   

HK01-I-ORB

To top