Ideal’s SK357 push paddle for storm doors is an inside latch that can be used with push-button, pull, and lever style exterior handles.
COMPATIBILITY
The SK357 is compatible with all styles of exterior handle: Push-button, pull, and lever. It can replace various styles of inside handles, including handles that turn (rotate).
The SK357 uses the 1-3/4" hole spacing that is standard on most surface-mount storm door handle sets.
EXCEPTIONS
BEFORE BUYING, MAKE SURE YOUR CURRENT LATCH IS COMPATIBLE. Some other manufacturers use interior latches that look like the SK357, but have non-standard dimensions.
KEY DIFFERENCES:
-HOLE SPACING: Ensure the hole spacing on your current latch is 1-3/4”.
-SPINDLE SIZE: When you replace your current latch, you will most likely keep using your existing spindle. The SK357 can accommodate various spindle styles: Flat steel, round steel, and square zinc & steel combos, but note that the maximum spindle size is 0.176"/4.47 mm. If yours is a square spindle that is the same size the whole way, it will likely not work with our SK357. Please measure carefully and take a look at our images as a guide.
**What’s a “spindle”?** The spindle is the piece of metal that goes through the door and connects the outside handle to the inside handle.
COMPATIBLE HANDLE SETS
This inside latch is used in the following Ideal Security handle series: GL series (SKGLW, HK357DB05, HK01), ML series. It is also compatible with the DX Series (SKDX, LSDXCR2267).
ABOUT IDEAL
Ideal Security has been supplying door manufacturers with quality products since 1956.With Ideal products, you can trust that you are replacing your existing hardware with accessories of equal, or often better, quality.
.png)