Ease, elegance, and securityAll in oneThe DX storm door pull handle and keyed locking set compliments a wide range of decor styles. This elegant and easy to operate handle replaces the standard handles pre-installed on most storm doors. All 4 components are the same color or finish.
Natural movementsNo buttons to push or levers to turn! From the outside, simply pull the handle and the door opens. The interior latch features an easy opening push movement.
SecurityThe included keyed lock complements the appearance of the handle and provides additional security. Keep your main door open and enjoy the light that comes in through a storm door, and still feel secure.
The interior latch doesn't lock.
Installation and compatibilityThis set includes everything needed for an installation and will fit doors from 1 in. to 2-1/8 in. thick. The spindle for the deadlock may be cut for your custom installation.
If replacing an existing handle, the screw posts must be 1-3/4 in. apart.
For new installations, three holes must be drilled through the door for the screws and spindle.
The key lock is usually installed above the handle.
Installation will take about 30 minutes. A tape measure, drill and screw driver may be required. A center punch to mark the holes is helpful.
IDEAL Security has been supplying quality hardware to door manufacturers for over 50 years.